Specifications

9-192

Cisco MGX 8260 Command Line Interface Guide

Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002

Chapter 9 Command Reference

lsbertds1

List DS1 BERT results.

lsbertds1 Location

Syntax Description

Defaults No default behavior or values.

Command Modes Security level 3

Command History

Usage Guidelines Displays the bit error rate status of the specified DS1 line. Use in conjunction with onbertds1 and

offbertds1 to test a DS1 line. For more information, see DS1/E1 BERT Test, page 8-5.

Examples The following example shows the BERT status of the DS1 line at slot 11 line 1.

lsbertds1 11.1

Location The slot and line number, delimited by a period, of the DS1 line. For

example, enter slot 3 line 2 as 3.2. Valid slot numbers:

• NSC: 1-8 and 11-16

• BSC: 11-16

Valid line numbers:

• NSC: 1-16

• BSC: 1-168 as shown by the following table of DS1 to DS3 mappings.

DS3 Line Number DS1 Line Number

501 1-28

502 29-56

503 57-84

504 85-112

505 113-140

506 141-168

Release Modification

1.0 This command was first introduced.