Specifications

2-14
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 2 System Management
Configuration Tasks for System Initialization
Switching to the Secondary Clock
You can force the system to switch between the primary and secondary clocks. The switching direction
depends on the current clock. During normal operation, the current clock is the primary clock.
To switch to the clock sources, enter the swclk command.
Clock Stratum The level of Stratum clock:
• level 3 (reserved for future use)
• level 4
Master Clock The master clock source:
• primary
• secondary
• internal
Current Clock The current clock source:
• primary
• secondary
• internal
Displayed Information Description