Specifications

9-185
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
lsacp
lsacp
List information on an active call
lsacp Slot Line ID
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 5
Command History
Usage Guidelines Use this command to list information about the call using a specific MGX 8260 resource. The slot, line,
and DS0 is valid for a given time only, because the resource is re-used after the current active call is
torn down.
Examples The following example lists information on the call on slot 1, line 1, DS0 1:
lsacp 3 1 1
Related Commands
Slot The physical source (slot number) of an active call. Values: 1-16.
Line The physical source (line number) of an active call. Values: 1-16.
ID The DS0 used by an active call. Values: 1-24.
Release Modification
1.0 This command was first introduced.
Command Description
lsacps List all active calls by resource
lsact List an active call by transaction ID
lsacts List all active calls by transaction