Specifications

2-13
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 2 System Management
Configuration Tasks for System Initialization
Viewing Clock Parameters
You view clock status with a single command. The clock parameters are:
• Status of the primary and secondary clocks
• The current clock source
• The lowest stratum level of the current clock source
To view clock status, enter the lsclksrcs command.
The system displays the clock status:
========================================================================
Clock Configuration (lsclksrcs)
========================================================================
Primary Clock Source Type : externalClk
Primary Clock Source Slot : 9
Primary Clock Source Line : 1
Secondary Clock Source Type: internalClk
Secondary Clock Source Slot: 9
Secondary Clock Source Line: 1
Primary Clock Status : ok
Secondary Clock Status : ok
Clock Source Card Type : *
Clock Stratum : level4
Master Clock : primary
Current Clock : primary
Displayed Information Description
Primary (or Secondary) Clock Source Type The clock source type:
• broadBandClk
• narrowBandClk
• externalClk
• internalClk
Primary (or Secondary) Clock Source Slot The slot number for the clock source. Values: 1 to 16
Primary (or Secondary) Clock Source Line The line number for the clock source. Values:
• NSC DS1 lines: 1 to 16
• BSC DS3 lines: 501 to 506
• DMC DS3 lines: 1 to 6
• SCC, OC3 type: 1 to 4
• SCC, BITS type: 1
Primary (or Secondary) Clock Status The clock status:
• ok
• noClock
• inaccurate
Clock (or Secondary) Source Type The clock source card type:
• bits
• oc3