Specifications

9-174
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
delsonetln
delsonetln
Delete SONET lines.
delsonetln Location [numOfLines]
Syntax Description
Defaults numOfLines: 1
Command Modes Security level 3
Command History
Usage Guidelines Use this command to delete SONET lines from the OC-3 SCC and back card. You can delete a single
line or a range of lines with this command. The system deletes lines one at a time and aborts on the first
failure, even if subsequent changes could have succeeded. The system issues an error message for
partially fulfilled requests.
Examples The following example deletes SONET lines 3 and 4 in slot 9:
delethln 9.3 2
Related Commands
Location The slot and line number, delimited by a period, of the OC-3 line.
Valid slot: 9. Valid lines: 1-4
numOfLines The number of lines to delete. Values: 1-4.
Release Modification
1.2 This command was first introduced.
Command Description
addsonetln Add a SONET line
chsonetln Change a SONET line
lssonetln List information about a SONET line
lssonetlns List information about all SONET lines