Specifications

9-168
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
deliproute
deliproute
Delete an IP route.
deliproute IPRouteDest
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 3
Command History
Usage Guidelines Use this command to delete an IP route from the MGX 8260 Media Gateway routing table.
Examples The following example deletes indirect IP route 10.1.1.1:
deliproute 10.1.1.1
Related Commands
IPRouteDest The destination IP address of this route. An entry of 0.0.0.0 is considered a
default route. Multiple routes to a single destination can appear in the table,
but access to them is dependent on the table-access mechanisms defined by
the network management protocol.
Release Modification
1.2 This command was first introduced.
Command Description
addiproute Add an IP route
lsiproute List an IP route
lsiproutes List IP routes