Specifications

9-162

Cisco MGX 8260 Command Line Interface Guide

Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002

Chapter 9 Command Reference

delds1ln

Delete DS1(T1 or E1) lines.

delds1ln Index Numlines

Syntax Description

Defaults Numlines: 1

Command Modes Security level 3

Command History

Usage Guidelines Use this command to delete a one or more DS1/E1 lines. You can’t delete a DS1/E1 line if a voice port

is configured for the line. When deleting a range of lines, the process stops after the last line or at the

first error.

Index The slot and line number, delimited by a period, of the DS1 line. For

example, enter slot 3 line 2 as 3.2. Valid slot numbers:

• NSC: 1-8 and 11-16

• BSC: 11-16

Valid line numbers:

• NSC: 1-16

• BSC: 1-168 as shown by the following table of DS1 to DS3 mappings.

DS3 Line Number DS1 Line Number

501 1-28

502 29-56

503 57-84

504 85-112

505 113-140

506 141-168

Numlines Number of lines to delete. The MGX 8260 stops deleting lines at the first

failure. Values: 1-1136.

Release Modification

1.0 This command was first introduced.

1.2 Added E1 lines