Specifications

9-144
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
clre1lnst
Defaults No default behavior or values.
Command Modes Security level 4
Command History
Usage Guidelines Use this command to clear the specified E1 real-time statistic.
Examples The following example clears the LCV 24 Hour counter in the dsx1TotalTablefor the E1 line at slot 1
line 1.
clre1lnst 1.1 4
Related Commands
Stat
Cont.
31=Clear PCV in e1CurrentTable
32=Clear PCV in e1TotalTable
33=Clear Control Slip seconds in e1CurrentTable
34=Clear Control Slip seconds in e1TotalTable
35=Clear all counters in e1CurrentTable
36=Clear all counters in e1TotalTable
Release Modification
1.0 This command was first introduced.
Command Description
lsbertds1 List DS1 BERT results
lsds1alm List DS1 alarm thresholds
lsds1curst List DS1 current statistics
lsds1cursts List DS1 current statistics
lsds1intst List DS1 interval statistics
lsds1ln List DS1 line
lsds1lns List DS1 lines
lsds1lnst List DS1 line statistics
lsds1totst List DS1 total statistics
lsds1totsts List DS1 total statistics
lslns List existing lines
offbertds1 Stop BERT on DS1
onbertds1 Start BERT on DS1