Specifications

9-134
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chtmgr
Defaults Port: 162
Interface: 1
Com_String: “public”
Bitmap: 0
Command Modes Security level 3
Command History
Usage Guidelines Network administrators can receive email for up to 20 traps. Use this command to change a manager’s
SNMP trap registrations.
Examples The following example changes the manager at address 10.1.1.10 and udp port 162 to receive events
for the traps specified by bitmap 1100110.
The bitmap is a binary number that represents the settings.
To use this bitmap, convert it to a decimal value and specify it as the last argument. Binary 1100110 is
102 decimal. Therefore, you enter the command as follows:
chtmgr 10.1.1.10 2 162 public 102
The second argument (2) sets the in-band interface as the default interface for sending traps when the
routing table has no trap manager.
Related Commands
Release Modification
1.0 This command was first introduced.
Trap dsx1line SNMP Information Minor
Value 11001 10
Bit 65432 10
Command Description
addcms Add community string
addtmgr Add trap manager
deltmgr Delete trap manager
lstmgr List trap manager
lstmgrs List trap managers