Specifications

9-123
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chsonetperdi
chsonetperdi
Change extended rdi parameters for SONET paths.
chsonetperdi Location [numOfLines SupportPathERDI SignalLabel ExpectedSignalLabel]
Syntax Description
Defaults numOfLines: 1
SupportPathERDI: 1
SignalLabel: 19
ExpectedSignalLabel: 19
Command Modes Security level 3
Command History
Usage Guidelines Use this command to enable and configure the e-rdi feature for SONET lines. This feature is disabled
by default when you add SONET lines.
Examples The following example enables e-rdi for SONET line 1 in slot 9:
chsonetperdi 9.1 1 2
Location The slot and line number, delimited by a period, of the OC-3 line.
Valid slot: 9. Valid lines: 1-4
numOfLines The number of lines to add. Values: 1-4.
SupportPathERDI The state of the enhanced remote defect indication for the SONET path:
1=Disable
2=Enable
SignalLabel The signal label to transmit in the SONET path overhead:
1=No specific payload type
19=ATM
207=Packet on SONET
ExpectedSignalLabel The expected signal label from the SONET path overhead:
1=No specific payload type
19=ATM
207=Packet on SONET
Release Modification
1.2 This command was first introduced.