Specifications

9-122
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chsonetln
Command History
Usage Guidelines Use this command to change the configuration of SONET/SDH interfaces on the OC-3 SCC and back
card. Although the SCC may occupy physical slots 9 or 10, you always configure logical slot 9. This
command only applies to the OC-3 SCC.
You can change a single line or a range of lines with this command. The system changes lines one at a
time and aborts on the first failure, even if subsequent changes could have succeeded. The system issues
an error message for partially fulfilled requests.
Examples The following example activates a line loopback on a SONET line:
chsonetln 9.1 # # # 2
Related Commands
Release Modification
1.2 This command was first introduced.
Command Description
addsonetln Add a SONET line
delsonetln Delete a SONET line
lssonetln List information about a SONET line
lssonetlns List information about all SONET lines