Specifications

9-121
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chsonetln
chsonetln
Change SONET lines.
chsonetln Location [numOfLines MediumType FrameType LoopConfig HCSmasking
PayloadScrambling FrameScrambling TxClockSource AdminStatus]
Syntax Description
Defaults numOfLines: 1
Command Modes Security level 3
Location The slot and line number, delimited by a period, of the OC-3 line.
Valid slot: 9. Valid lines: 1-4
numOfLines The number of lines to add. Values: 1-4.
MediumType The type of physical medium:
1=SONET
2=SDH (reserved for future use)
FrameType The type of framing:
1=STS-3c
2=STM-1 (reserved for future use)
LoopConfig The loopback state:
1=No loop
2=Line loop
3=Serial loop
4=Parallel loop
HCSmasking The HCS masking state (reserved for future use)
PayloadScrambling The payload scrambling state:
1=Disable
2=Enable
FrameScrambling The frame scrambling state:
1=Disable
2=Enable
TxClockSource The clock source for the transmit signal:
1=Loop Timing, use the recovered receive clock
2=Local Timing, use the local clock
3=Through Timing (reserved for future use)
AdminStatus The desired administrative status of the line:
1=Up