Specifications

9-117
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chsonetalm
Defaults This command has no default behavior or values. The following defaults apply to a new SONET line:
redSeverity: 2
yellowSeverity: 1
perfSeverity: 1
SeCV15MinThresh: 15
SeCV24HrThresh: 134
SeES15MinThresh: 12
SeES24HrThresh: 120
SeSES15MinThresh: 10
SeSES24HrThresh: 100
SeSEFS15MinThresh: 5
SeSEFS24HrThresh: 20
LCV15MinThresh: 15
LCV24HrThresh: 134
LES15MinThresh: 12
LES24HrThresh: 120
LSES15MinThresh: 10
LSES24HrThresh: 100
LUAS15MinThresh: 12
LUAS24HrThresh: 20
PCV15MinThresh: 15
PCV24HrThresh: 134
PES15MinThresh: 12
PES24HrThresh: 120
PSES15MinThresh: 10
PSES24HrThresh: 100
PCV15MinThresh The path threshold for code violations in a 15-minute or sliding 24-hour
window. Code violations are Bit Interleaved Parity errors detected in the
incoming signal.
PCV24HrThresh
PES15MinThresh The path threshold for errored seconds in a 15-minute or sliding 24-hour
window. An errored second is a second with one or more code violations at
that layer or incoming defects.
PES24HrThresh
PSES15MinThresh The path threshold for severely errored seconds in a 15-minute or sliding
24-hour window. A severely errored second is one in which code violations
or incoming defects occurred.
PSES24HrThresh
PUAS15MinThresh The path threshold for unavailable seconds in a 15-minute or sliding
24-hour window. Unavailable seconds represent the number of seconds that
the interface is unavailable.
PUAS24HrThresh