Specifications

9-112
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chsclksrc
chsclksrc
Change secondary clock source.
chsclksrc Slot Line ClkSrcType CardType
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 2
Command History
Usage Guidelines Use this command to configure the secondary clock source. If the Type parameter is broadband or
narrowband, the Slot Num and Line Num parameters are mandatory. If the Type is external or internal,
do not provide this parameter.
Examples The first example configures a external bits clock source. The second configures a broadband clock
source on slot 1, line 2.
chsclksrc # # 3 1
chsclksrc 1 2 1 2
Related Commands
Slot Slot number of the clock source.
Line Line number of clock source.
Type Type of clock source, broadband, narrowband, external, or internal. Values:
1, 2, 3, and 4 respectively.
CardType Type of card, bits or OC3. Values 1 and 2, respectively.
Release Modification
1.0 This command was first introduced.
Command Description
chpclksrc Change primary clock source
swclk Switch clock
lsclksrcs List clock sources