Specifications

9-107
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chprotocol
chprotocol
Switch between MGCP and IPDC protocols.
chprotocol protocol
Syntax Description
Defaults protocol: 1
Command Modes Security level 2
Command History
Usage Guidelines The MGX 8260 Media Gateway supports two protocols for voice call control, MGCP and IPDC. Use
this command to switch from one protocol to the other. This command automatically resets the chassis.
Examples The following example switches from MGCP to IPDC.
chprotocol 2
Related Commands
protocol The call control protocol. Values: 1 = MGCP; 2 = IPDC
Release Modification
1.2 This command was first introduced.
Command Description
chipdcpssip Change IPDC primary Soft Switch IP and TCP port
chipdcsssip Change IPDC secondary Soft Switch IP and TCP port
chipdcgwip Change IPDC gateway IP and TCP port
chipdcssid Change IPDC system ID
chipdcsstype Change IPDC system type
chipdcssbaynum Change IPDC Bay Number
chipdcmaxm Change IPDC Maximum Modules
chipdcssnumfor Change IPDC Numbering format
chipdcssadm Change IPDC Admin Status
chipdcsshlth Change IPDC Health Check
chipdctimer Change IPDC Timers
chpseudoip Change pseudo IP address
lsipdc List IPDC Soft Switch configuration
lsipdctimer List IPDC Timer Configuration
lsipdccot List IPDC COT Configuration