Specifications

9-102
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chpclksrc
chpclksrc
Change primary clock source.
chpclksrc SlotNum LineNum ClkSrcType CardType
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 2
Command History
Usage Guidelines Use this command to configure the primary clock source. If the Type parameter is broadband or
narrowband, the Slot Num and Line Num parameters are mandatory. If the Type is external or internal,
do not provide this parameter.
Examples The first example configures an external clock source. The second configures a broadband clock source
on slot 12, line 8.
chpclksrc # # 3 #
chpclksrc 12 8 1 #
SlotNum Slot number of the clock source. Values: 1 to 16
LineNum Line number of clock source. Values:
NSC DS1 lines: 1 to 16
BSC DS3 lines: 501 to 506
DMC DS3 lines: 1 to 6
SCC, OC3 type: 1 to 4
SCC, BITS type: 1
ClkSrcType Type of clock source, broadband, narrowband, external, or internal. Values:
1, 2, 3, and 4 respectively.
CardType Type of card, bits or OC3. Values 1 and 2, respectively.
Release Modification
1.0 This command was first introduced.
1.1 Added BSC extensions
1.2 Added OC-3 extensions