Specifications

9-101
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chndinf
chndinf
Configure node information.
chndinf RackNum NodeName NodeNum
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 2
Command History
Usage Guidelines Use this command to configure system identification information and set the DS1 line type. You set the
number of the physical rack, along with the name and number of the chassis. The rack contains the shelf,
or chassis, for a node.
Examples The following example configures node information.
chndinf 3 Floor3 12
Related Commands
RackNum Shelf number for node. Values: 1 - 100.
NodeName Alphanumeric identifier for node. Values: up to 15 characters
NodeNum Numeric identifier for node. Values: Integer, 1 - 1000
Release Modification
1.0 This command was first introduced.
Command Description
chsyslnmd Change the line mode for the chassis.
lsndinf List node information.