Specifications

9-96
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chmgcpdname
chmgcpdname
Change the node domain name.
chmgcpdname DomainName
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 2
Command History
Usage Guidelines Use this command to define a domain name for the MGX 8260 chassis. The domain name is an
alternative to IP addressing.
Examples The following assigns a domain name.
chmgcpdname cisco
Related Commands
DomainName The domain name for this node. Value: 1-64 characters
Release Modification
1.0 This command was first introduced.
Command Description
chmgcplocaladdr1 Change the MGCP local address for network 1
chmgcplocaladdr2 Change the MGCP local address for network 2
chmgcpcore Change MGCP core parameters
chpmgcpaddr Change the primary Media Gateway Controller addresses
chsmgcpaddr Change the secondary Media Gateway Controller addresses
lsmgcp List MGCP core parameters
lsmgcpdef List MGCP default parameters