Specifications

9-93
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chm13
chm13
Change DS1 to DS3 map.
chm13 SrcDS3LineNum SrcDS1LineNum DestDS1SlotNum DestDS1LineNum
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 3
Command History
Usage Guidelines Use this command to change a DS3 to DS1 mapping from Distribution Matrix Card (DMC) to the NSC.
Examples For example the following command sequence adds three map table entries and then changes one of
them:
addm13 1 3 1 1 3
chm13 1 3 1 4
Related Commands
SrcDS3LineNum The number of the source DS3 line. Values: 1 - 6.
SrcDS1LineNum The number of the DS1 line, or starting DS1 line, within the DS3 line.
Values: 1 - 28.
DestDS1SlotNum The logical slot number for the destination NSC (Narrowband Service
Card).
DestDS1LineNum The number of the DS1, or starting DS1, in the NSC. Valid entries are 1
through 16.
Release Modification
1.0 This command was first introduced.
Command Description
addm13 Add map to DS1 from DS3
delm13 Delete DS1 to DS3 map
lsm13 List DS3-to-DS1 mapping
lsm13s List DS3-to-DS1 mappings