Specifications

9-87
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chipdcsssip
chipdcsssip
Change IPDC secondary Soft Switch IP and TCP port.
chipdcsssip ip port
Syntax Description
Defaults port: 5000
Command Modes Security level 2
Command History
Usage Guidelines Use this command to configure the secondary Soft Switch IPDC. If you change the secondary Soft
Switch IP Address, change the corresponding secondary TCP port also.
Examples The following example configures the secondary Soft Switch IP address and TCP port.
chipdcsssip 10.1.1.1 1026
Related Commands
ip The secondary Soft Switch IP address.
port The secondary Soft Switch TCP port. This port number cannot be a
well-known port number. Values: 1025 - 65535. Default: 5000
Release Modification
1.2 This command was first introduced.
Command Description
chipdcpssip Change IPDC primary Soft Switch IP and TCP port
chipdcgwip Change IPDC gateway IP and TCP port
chipdcssid Change IPDC system ID
chipdcsstype Change IPDC system type
chipdcssbaynum Change IPDC Bay Number
chipdcmaxm Change IPDC Maximum Modules
chipdcssnumfor Change IPDC Numbering format
chipdcssadm Change IPDC Admin Status
chipdcsshlth Change IPDC Health Check
chipdctimer Change IPDC Timers
chipdccot Change IPDC COTs
chpseudoip Change pseudo IP address
lsipdc List IPDC Soft Switch configuration