Specifications

9-86
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chipdcssnumfor
chipdcssnumfor
Change IPDC numbering format.
chipdcssnumfor format
Syntax Description
Defaults format: 1
Command Modes Security level 2
Command History
Usage Guidelines Use this command to set the IPDC numbering format.
Examples The following example sets the IPDC numbering format to 1-base.
chipdcssnumfor 2
Related Commands
format The format that determines the Soft Switch interpretation of module, line,
and channel numbers on an MGX 8260. Values: 1= 0-base; 2=1-base.
Release Modification
1.2 This command was first introduced.
Command Description
chipdcpssip Change IPDC primary Soft Switch IP and TCP port
chipdcsssip Change IPDC secondary Soft Switch IP and TCP port
chipdcgwip Change IPDC gateway IP and TCP port
chipdcssid Change IPDC system ID
chipdcsstype Change IPDC system type
chipdcssbaynum Change IPDC Bay Number
chipdcmaxm Change IPDC Maximum Modules
chipdcssadm Change IPDC Admin Status
chipdcsshlth Change IPDC Health Check
chipdctimer Change IPDC Timers
chipdccot Change IPDC COTs
chpseudoip Change pseudo IP address
lsipdc List IPDC Soft Switch configuration
lsipdctimer List IPDC Timer Configuration
lsipdccot List IPDC COT Configuration