Specifications

9-83
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chipdcsshlth
chipdcsshlth
Change IPDC health check.
chipdcsshlth admp adms dntime
Syntax Description
Defaults admp: 1
adms: 1
dntime: 1000
Command Modes Security level 2
Command History
Usage Guidelines Use this command to enable the primary or secondary link health check.
Examples The following example enables the primary link health check in 200 msec.
chipdcsshlth 1 200
Related Commands
admp Enable or disable the link health check for the primary Soft Switch.Values:
1=enable; 2=disable
adms Enable or disable the link health check for the secondary Soft Switch.
Values: 1=enable; 2=disable
dntime The time to wait before disabling the link health check. Values: 400 to
10000 msec
Release Modification
1.2 This command was first introduced.
Command Description
chipdcpssip Change IPDC primary Soft Switch IP and TCP port
chipdcsssip Change IPDC secondary Soft Switch IP and TCP port
chipdcgwip Change IPDC gateway IP and TCP port
chipdcssid Change IPDC system ID
chipdcsstype Change IPDC system type
chipdcssbaynum Change IPDC Bay Number
chipdcmaxm Change IPDC Maximum Modules
chipdcssnumfor Change IPDC Numbering format
chipdcssadm Change IPDC Admin Status