Specifications

9-82
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chipdcssbaynum
chipdcssbaynum
Change IPDC bay number.
chipdcssbaynum num
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 2
Command History
Usage Guidelines Use this command to assign a bay number to the IPDC.
Examples The following example configures the bay number.
chipdcssbaynum NUM45678
Related Commands
num The number associated with gateway being controlled. A string of exactly
8 characters.
Release Modification
1.2 This command was first introduced.
Command Description
chipdcpssip Change IPDC primary Soft Switch IP and TCP port
chipdcsssip Change IPDC secondary Soft Switch IP and TCP port
chipdcgwip Change IPDC gateway IP and TCP port
chipdcssid Change IPDC system ID
chipdcsstype Change IPDC system type
chipdcmaxm Change IPDC Maximum Modules
chipdcssnumfor Change IPDC Numbering format
chipdcssadm Change IPDC Admin Status
chipdcsshlth Change IPDC Health Check
chipdctimer Change IPDC Timers
chipdccot Change IPDC COTs
chpseudoip Change pseudo IP address
lsipdc List IPDC Soft Switch configuration
lsipdctimer List IPDC Timer Configuration
lsipdccot List IPDC COT Configuration