Specifications

9-81
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chipdcssadm
chipdcssadm
Change IPDC administrative status.
chipdcssadm primary secondary downtime
Syntax Description
Defaults primary: 1
secondary: 1
downtime: 0
Command Modes Security level 2
Command History
Usage Guidelines Use this command to connect or disconnect the primary or secondary IPDC administrative status. If the
downtime is set to 0, the link is disconnected immediately. If the downtime is set to greater than 0, the
Soft Switch disconnects in the time specified.
Examples The following example sets the administrative status of the primary IPDC Soft Switch down.
chipdcssadm 1
primary The administrative status of link with the primary Soft Switch. Values:
1=down, disconnect the current call server
2=up, connect the current call server
3=graceful disconnect, disconnect the current call server after the time
specified by downtime. (reserved for future use)
secondary The administrative status of link with the secondary Soft Switch. Values:
1=down, disconnect the current call server
2=up, connect the current call server
3=graceful disconnect, disconnect the current call server after the time
specified by downtime. (reserved for future use)
downtime The graceful disconnect time for both Soft Switches. Value: 0 only (no
graceful disconnect)
Release Modification
1.2 This command was first introduced.