Specifications

9-79
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chipdcpssip
chipdcpssip
Change IP Device Control (IPDC) primary Soft Switch IP and TCP port.
chipdcpssip ip port
Syntax Description
Defaults port: 5000
Command Modes Security level 2
Command History
Usage Guidelines Use this command to configure the primary Soft Switch IPDC. If you the primary Soft Switch IP
Address, change the related, primary TCP port also.
Examples The following example configures the primary Soft Switch IP address and TCP port.
chipdcpssip 10.1.1.1 1026
Related Commands
ip The primary Soft Switch IP address.
port The primary Soft Switch TCP Port. This port number cannot be a
well-known port number. Values: 1025 - 65535. Default: 5000
Release Modification
1.2 This command was first introduced.
Command Description
chipdcsssip Change IPDC secondary Soft Switch IP and TCP port
chipdcgwip Change IPDC gateway IP and TCP port
chipdcssid Change IPDC system ID
chipdcsstype Change IPDC system type
chipdcssbaynum Change IPDC Bay Number
chipdcmaxm Change IPDC Maximum Modules
chipdcssnumfor Change IPDC Numbering format
chipdcssadm Change IPDC Admin Status
chipdcsshlth Change IPDC Health Check
chipdctimer Change IPDC Timers
chipdccot Change IPDC COTs
chpseudoip Change pseudo IP address
lsipdc List IPDC Soft Switch configuration