Specifications

9-78
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chipdcmaxm
chipdcmaxm
Change IPDC maximum modules.
chipdcmaxm num
Syntax Description
Defaults num: 16
Command Modes Security level 2
Command History
Usage Guidelines Use this command to set the maximum number of modules.
Examples The following example sets the maximum number of modules to 10.
chipdcmaxm 10
Related Commands
num Maximum number of modules (slot cards) supported. Values: integer from
1 - 16
Release Modification
1.2 This command was first introduced.
Command Description
chipdcpssip Change IPDC primary Soft Switch IP and TCP port
chipdcsssip Change IPDC secondary Soft Switch IP and TCP port
chipdcgwip Change IPDC gateway IP and TCP port
chipdcssid Change IPDC system ID
chipdcsstype Change IPDC system type
chipdcssbaynum Change IPDC Bay Number
chipdcssnumfor Change IPDC Numbering format
chipdcssadm Change IPDC Admin Status
chipdcsshlth Change IPDC Health Check
chipdctimer Change IPDC Timers
chipdccot Change IPDC COTs
chpseudoip Change pseudo IP address
lsipdc List IPDC Soft Switch configuration
lsipdctimer List IPDC Timer Configuration
lsipdccot List IPDC COT Configuration