Specifications

2-3
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 2 System Management
Configuration Tasks for System Initialization
Adding User Profiles
Only users with access level 1 can add new profiles to the MGX 8260 Media Gateway.
To add a new user profile, follow these steps:
Step 1 Log on to the MGX 8260 Media Gateway at access level 1.
Step 2 Enter the addusp command, specifying the user ID and access level:
The system adds a new user with a default password that matches the user id.
The following example adds a user named William with a default password of William and an access
level of 1:
addusp William 1
Change the default password to a unique password as described in the next section.
Changing Passwords
Every user can change their own password. If the existing password is unknown, a level 1 user must
delete the account and add a new one.
To change a password, follow these steps:
Step 1 Log onto the account you want to change.
Enter the chpwd command and respond to the following prompts that appear:
Rules:
1. Password length must be 4 - 10
2. First character must be alphanumeric
3. Only printable characters are allowed
4. Space not allowed
Enter Password : *****
New Password : ********
Verify Password: ********
The system updates the account password.
Deleting User Profiles
To delete a user profile, follow these steps:
Step 1 Log on to the MGX 8260 Media Gateway at access level 1.
Step 2 Enter the delusp command, specifying the ID of the user whose profile you want to delete:
The system removes the user profile from the database.