Specifications

9-76
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chipdcgwip
chipdcgwip
Change IPDC gateway IP and TCP port.
chipdcgwip ip port
Syntax Description
Defaults port: 5000
Command Modes Security level 2
Command History
Usage Guidelines Use this command to configure.When you modify the gateway IP address, you must also change the
related TCP port number.
Examples The following example configures the Soft Switch gateway IP address and TCP port.
chipdcgwip 1025 6000
Related Commands
ip The IP address of gateway for MSCP link.
port The TCP Port number of gateway for MSCP link. This port number cannot
be a well-known port number. Values: 1025 - 65535. Default: 5000
Release Modification
1.2 This command was first introduced.
Command Description
chipdcpssip Change IPDC primary Soft Switch IP and TCP port
chipdcsssip Change IPDC secondary Soft Switch IP and TCP port
chipdcssid Change IPDC system ID
chipdcsstype Change IPDC system type
chipdcssbaynum Change IPDC Bay Number
chipdcmaxm Change IPDC Maximum Modules
chipdcssnumfor Change IPDC Numbering format
chipdcssadm Change IPDC Admin Status
chipdcsshlth Change IPDC Health Check
chipdctimer Change IPDC Timers
chipdccot Change IPDC COTs
chpseudoip Change pseudo IP address
lsipdc List IPDC Soft Switch configuration