Specifications

9-70
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chethln
chethln
Change Fast Ethernet line.
chethln Location [Gway_Addr RDP Mask Mode]
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 3
Command History
Usage Guidelines Use this command to change an Ethernet interface on the Fast Ethernet SCC and back card.
Examples Tor example, the following command enables RDP but leaves other parameters unchanged on Fast
Ethernet line 1 in slot 9:
chethln 9.1 # 2
Related Commands
Location The slot and line number, delimited by a period, of the Ethernet line. Values:
Slot = 9, Line = 1-4.
Gway_Addr The IP address of the primary gateway for the interface.
RDP The state of the Router Discovery Protocol. Values: 1 = disabled,
2 = enabled.
Mask The subnet mask in dotted notation a.b.c.d.
Mode The duplex mode of the line. Values: 1 = Half duplex, 2 = Full duplex.
Release Modification
1.0 This command was first introduced.
Command Description
addethln Add Ethernet line
delethln Delete Ethernet line
upethln Activate Ethernet line
dnethln DeActivate Ethernet line
lsethln List Ethernet line
lsethlns List Ethernet Lines