Specifications

9-68
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chem
chem
Configure email registration.
chem [EmailServerDomain EmailServerIPAddr SourceEmailAddr]
Syntax Description
Defaults EmailServerIPAddr: 0.0.0.0
Command Modes Security level 3
Command History
Usage Guidelines Use this command to configure email server information and the source email address for receiving
alerts about SNMP traps. You must configure the email server IP address correctly enable email alerts.
If one or more fields of the IP address exceeds 255, SNMP stores the address as 255.255.255.255 and
the MGX 8260 Media Gateway disables email alerts.
Examples The following example configures email from server domain WORKGROUP and server IP address
10.10.1.10 with a ‘from’ email address of [e-mail].
chem WORKGROUP 10.10.1.10 [e-mail]
Related Commands
EmailServerDomain The domain name of the email server on your network. Values: A text
string, maximum 30 characters.
EmailServerIPAddr The IP address of the email server in standard IP dot notation. The 0.0.0.0
setting disables email notifications. Any valid IP address enables email
notifications.
SourceEmailAddr The ‘from’ email address for messages from the MGX 8260 Media
Gateway. Values: A text string, maximum 40 characters. For example,
[e-mail].
Release Modification
1.0 This command was first introduced.
Command Description
addereg Add email registration
chereg Change email registration
delereg Delete email registration
lsem List email server
lsereg List entry registered
lseregs List registered email alerts