Specifications

9-59

Cisco MGX 8260 Command Line Interface Guide

Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002

Chapter 9 Command Reference

chds3ln

Change DS3 line.

chds3ln Location numOfLines [LineType LineCoding SendCode LoopConfig XmitClkSrc Cable]

Syntax Description Location The slot and line number, delimited by a period, of the DS3 line.

Valid slot numbers:

BSC: 11-16

DMC: 7 or 8 (reserved for future use)

Valid line numbers:

BSC: 501-506

DMC: 1-6 (reserved for future use)

numOfLines Number of lines to change. Values: 1-76.

LineType The type of DS3 C-bit, which affects the interpretation of the usage and

error statistics. Values are 1 - 8 and have the following names:

1=dsx3other (reserved for future use)

2=dsx3SYNTRAN (reserved for future use)

3=dsx3M23

4=dsx3CbitParity (reserved for future use)

5=dsx3ClearChannel (reserved for future use)

6=e3other (reserved for future use)

7=e3Framed (reserved for future use)

8=e3Plcp (reserved for future use)

LineCoding Zero suppression used on this interface.The line coding dsx3B3ZS and

e3HDB3 refers to patterns of normal bits and bipolar violations that are

used to replace sequences of zero bits of a specified length. Values are 1 - 3

and have the following names:

1=dsx3Other

2=dsx3B3ZS

3=e3HDB3 (reserved for future use)