Specifications

9-58
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chds3alm
SEFS15MinThreshold: 10
CSES24HrThreshold: 10
Command Modes Security level 3
Command History
Usage Guidelines Use this command to change alarm thresholds. For details on threshold counts, refer to Table 6-3 on
page 6-14.
Examples The following example changes the dsx3PerfAlmSeverity at DS3 line at slot 7 line 1 to major (2).
chds3alm 7.1 # # 2
Related Commands
Release Modification
1.0 This command was first introduced.
1.1 BSC card configuration - no functional change
Command Description
addds3ln Add DS3 line
chds3ln Change DS3 line
clrds3lnst Clear statistics for DS3 line
delds3ln Delete DS3 line
lsds3alm List DS3 alarm
lsds3curst List DS3 current statistics
lsds3intst List DS3 interval statistics
lsds3ln List DS3 line
lsds3lns List DS3 lines
lsds3totst List DS3 total statistics