Specifications

9-48
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chds1alm
Defaults No default behavior or values. The following defaults apply to a new DS1 line:
Red_Severity: 2
RAI_Severity: 1
Perf_Alarm_Severity: 1
LCV_15: 14
LCV_24: 134
LES_15: 12
LES_24: 121
LSES_15: 10
LSES_24: 100
SEFS_15: 2
SEFS_24: 17
PSAS_15: 2
PSAS_24: 17
UAS_15: 10
UAS_24: 10
PCV_15: 35
PCV_24: 50
PES_15:35
PES_24:50
PSES_15: 35
PSES_24: 50
BES_15: 35
BES_24: 50
PCSS_15: 35
PCSS_24: 50
Command Modes Security level 2
Command History
Usage Guidelines Use this command to change the configuration settings for alarm severity, performance integration
period, and thresholds for various error conditions, such as LCV, LES, and LSES. All counter thresholds
are integers greater than zero. For details, refer to Table 6-1 on page 6-6. If you do not enter optional
parameters for a threshold, that threshold is not changed.
Release Modification
1.0 This command was first introduced.
1.2 Added new alarms