Specifications

9-44
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chcsnumfor
chcsnumfor
Specify the MCS numbering format for modules, lines and channels (reserved for future use).
chcsnumfor format
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 2
Command History
Usage Guidelines Specifies the MCS interpretation of module, line and channel numbers on an MGX 8260 Media
Gateway. For example, you can specify DS0 numbers as 0-23 or 1-24
Examples The following example specifies a zero-based number format.
chcsnumfor 2
Related Commands
format Specification to start module, line, and channel numbering at 0 or 1.
1 = One-based
2 = Zero-based
Release Modification
1.0 This command was first introduced.
Command Description
chcsbaynum Change control server bay number