Specifications

9-41
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
chcdif
chcdif
Configure card interface.
chcdif Card Mode
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 2
Command History
Usage Guidelines Use this command to configure the interface mode of the sixteen DS1 interfaces on an NSC. Changing
the interface mode resets the card.
Examples The following example changes the interface mode of card 1 to back plane mode and consequently
resets the NSC.
chcdif 1 2
Related Commands
Card The number of an NSC card.
Mode Indicates whether the Narrowband Service Card (NSC) transmits and
receives traffic through the back card or redirected through the backplane
from the DC3 interface on the Distribution Matrix Card (DMC). Values:
1=back card
2=back plane
3=not applicable (no back card)
Release Modification
1.0 This command was first introduced.
Command Description
clrcdcnf Clear configuration of a card