Specifications

9-36

Cisco MGX 8260 Command Line Interface Guide

Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002

Chapter 9 Command Reference

addusp

Add user profile.

addusp Name Access_Level

Syntax Description

Defaults No default behavior or values.

Command Modes Security level 1

Command History

Usage Guidelines The MGX 8260 Media Gateway enforces security with user accounts and access levels. Users must log

onto the MGX 8260 Media Gateway before performing any task, and authenticated users can perform

only those tasks permitted by their access level. The MGX 8260 Media Gateway supports up to 20 user

accounts, each with access privileges ranging from full control to guest. Initially, the password is the

same as the user name, so instruct new users to change their password to a personal one using the chpwd

command. The following table summarizes access levels:

Users can use commands that have an access level equal to or greater than their account access level.

For example, a user account with an access level 4 can use all commands with access levels of 4, 5,

and 6.

Name The login name of the new user, expressed as a case-sensitive alphanumeric

string of four to ten characters. Special characters such as @, #, and $ are

allowed.

Access_Level A value associated with a user profile that determines access rights to the

MGX-8260 CLI and WebViewer.

Release Modification

1.0 This command was first introduced.

Access

Level Account Type Command Groups

1 SuperUser Access all features

2 Administrator Configure and view all features except user profiles and

community strings

3 Provisioning Configure and view system, port, lines, end points, and

connections

4 Maintenance Access selected level 3 commands

5 Operator View system, port, lines, end points, and connections

6 Guest View system, common lines and ports