Specifications

9-35
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
addtmgr
Usage Guidelines Network administrators can receive email notifications for up to 20 trap events. Use this command to
subscribe a manager to receive notification about specific trap events.
Examples The following example subscribes the manager at address 10.1.1.10 and udp port 162 to receive minor
and informational messages for cards and DS1 lines.
The bitmap is a binary number that represents the following settings:
To use this bitmap, convert it to a decimal value and specify it as the last argument. Binary 1100110 is
86 decimal. Therefore, you enter the command as follows:
addtmgr 10.1.1.10 162 2 public 86
The 2 in the third argument sets the in-band interface as the default interface for sending traps when the
routing table has no trap manager.
Related Commands
Trap dsx1line SNMP Card Shelf Information Minor Major
Bit Value 10101 10
Bit Position 65432 10
Command Description
addcms Add community string
chtmgr Change trap manager
deltmgr Delete trap manager
lstmgr List trap manager
lstmgrs List trap managers