Specifications

9-31
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
addsset
addsset
Add an MGCP session set.
addsset SessSetId MinSlot MinLine MaxSlot MaxLine RedunMode
Syntax Description
Defaults No default behavior or values.
Command Modes Security level 3
Command History
Usage Guidelines Session sets contain a collection of session groups and managers that control a range of MGX 8260
lines. One or two session sets are adequate for a single MGX 8260 chassis.
Examples The following example adds session set 1 for slots 1-168 of the BSC in slot 11:
addsset 1 11 1 11 168 1
Related Commands
SessSetId Session set index. Values: 1-6.
MinSlot The minimum slot number within the MGX 8260 Media Gateway chassis
assigned for this session set. Values: 1-8 and 11-16.
MinLine The minimum line number assigned for this Session Set. Values: 1-168 for
the BSC; 1-16 for the NSC.
MaxSlot The maximum slot number within the MGX 8260 Media Gateway chassis
assigned for this session set. Values: 1-8 and 11-16.
MaxLine The maximum line number assigned for this session set. Values: 1-168 for
the BSC; 1-16 for the NSC.
RedunMode The redundancy mode. Values: 1 or 2 as follows.
1=nonFaultTolerant, where the system can have one session group only to
a single MGC
2=faultTolerant, where the system can have one or two session groups to
redundant MGCs
Release Modification
1.0 This command was first introduced.
Command Description
addsess Add a session manager
addsset Add a session set
delsess Delete a session manager