Specifications

9-30

Cisco MGX 8260 Command Line Interface Guide

Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002

Chapter 9 Command Reference

addsrt

Add static route

addsrt Destination Slot.Line [RoutePriority]

Syntax Description

Defaults RoutePriority: 1

Command Modes Security level 3

Command History

Usage Guidelines Use to configure a static route from an MGX 8260 line to a network IP address. If the last byte of the

destination address is not 0, the static route is not set. You can configure static routes for empty slots

or non-existing lines, but the changes have no effect without the necessary hardware.

Examples The following example configures a static route from slot 1 line 1 of the MGX 8260 chassis to IP

address 12.1.1.0.

addesrt 12.1.1.0 9.1

Related Commands

Destination The IP address of a remote network with which you want a static route. The

last byte of the IP number must be zero. For example, 127.2.4.0 is valid

Slot.Line The slot and line number, delimited by a period, of the origin of the static

route. Since the outgoing interface is always an Ethernet line, valid slots are

9-10 and valid lines are 1-4

RoutePriority Priority for the route entry. Values: 1 - 10, 1 = highest

Release Modification

1.0 This command was first introduced.

Command Description

delsrt Delete static route

lssrt List static route

lssrts List static routes