Specifications

9-29
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
addsonetln
Command History
Usage Guidelines Use this command to configure optical SONET/SDH interfaces on the OC-3 SCC and back card.
Although the SCC may occupy physical slots 9 or 10, you always configure logical slot 9.
You can add a single line or a range of identically-configured lines with this command. The system adds
lines one at a time and aborts on the first failure, even if subsequent additions could have succeeded.
The system issues an error message for partially fulfilled requests.
Examples The following example adds a SONET line with default settings:
addsonetln 9.1
Related Commands
Release Modification
1.2 This command was first introduced.
Command Description
chsonetln Change a SONET line
delsonetln Delete a SONET line
lssonetln List information about a SONET line
lssonetlns List information about all SONET lines