Specifications

9-23
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
addmacsapprof
Defaults sapIf: 2
LinkArb: 2
LapdType: 2
MaxOutStFrames: 7
TimQUpperThresh: 1000
TimeQLowerThresh: 100
ConnTimer: 500
t201Timer: 1
t202Timer: 2
TEICheckTimer: 5
N202: 3
LowAutoTei: 64
KeepL1Up: 2
Command Modes Security level 3
Command History
Usage Guidelines You assign a MACSAP (Media Access Service Access Point) profile when adding a D Channel
management path to define a collection of settings for the D Channel protocol stack. These settings
describe the operating characteristics of the interface between LAPD and the physical layer.
Examples The following example adds a MACSAP profile with default settings:
addmacsapprof 1
t201Timer The T201 timer value. Values: 1 to 1024
t202Timer The T202 timer value. Values: 1 to 1024
TEICheckTimer The setting of the TEI check timer. Values: 1 - 1025. 1025 = disabled.
N202 The maximum number of transmissions of a TEI Identity request
message.
LowAutoTei The value that is greater than or equal to the lowest automatic TEI that
the ASP can allocate. Applicable only when configured for automatic
TEI assignment. Values: 1 to 127
KeepL1Up A setting that keeps MAC up all the time if True. Values:
1 = False
2 = True
Release Modification
1.0 This command was first introduced.