Specifications

9-22
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
addmacsapprof
addmacsapprof
Add a MACSAP profile.
addmacsapprof Index [sapIf LinkArb LapdType MaxOutStFrames TimQUpperThresh
TimeQLowerThresh ConnTimer t201Timer t202Timer TEICheckTimer N202 LowAutoTei
KeepL1Up]
Syntax Description Index The identifier of a MAC SAP. Values: 1 - 20.
sapIf The logical Interface. Values: 1 = user, 2 = network.
LinkArb Link setup arbitration scheme. Values: 1 = passive, 2 = active.
LapdType The type of LAPD interface. Values: 1 - 19, which have the following
mnemonics that, in most cases,. imply their meanings:
1=test
2=ccitt
3=att5EssBRA
4=att5EssPRA
5=att4Ess
6=ntDMS100BRA
7=ntDMS100PRA
8=vn2or3
9=insNet
10=tr6MPC
11=tr6PBX
12=ausb (Austel Basic)
13=ausp (Austel Primary)
14=nISDN1 (National ISDN-1)
15=etsi
16=bc303TMC (Bellcore tr303 tmc)
17=bc303CSC
18=ntDMS250
19=bellcore
MaxOutStFrames Maximum number of sequentially numbered I-frames that may be
outstanding. Values: 1 - 255.
TimQUpperThresh The timer queue upper threshold for the I-frame queue. When the
I-frame queue size exceeds this threshold, the congestion timer is
started and flow-control is turned on. Values: 1 to 32767
TimeQLowerThresh The timer queue lower threshold for I-frame queue. When the I-frame
queue size falls below this threshold, the congestion timer is stopped
and flow-control is turned off. Values: 1 to 32767
ConnTimer The connection timer. Values: 1 -1024.