Specifications

9-14

Cisco MGX 8260 Command Line Interface Guide

Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002

Chapter 9 Command Reference

addds3ln

Add a DS3 line.

addds3ln Location [RepeatLines LineType LineCoding SendCode LoopCfg XmitClkSource

CableLength]

Syntax Description Location The slot and line number, delimited by a period, of the new DS3 line.

Valid slot numbers:

BSC: 11-16

DMC: 7 or 8 (reserved for future use)

Valid line numbers:

BSC: 501-506

DMC: 1-6 (reserved for future use)

RepeatLines The number of lines you can add in a single request. Values are 1 - 76.

LineType The type of DS3 C-bit, which affects the interpretation of the usage and

error statistics. Values are 1 - 8 and have the following names:

1=dsx3other (reserved for future use)

2=dsx3SYNTRAN (reserved for future use)

3=dsx3M23

4=dsx3CbitParity (reserved for future use)

5=dsx3ClearChannel (reserved for future use)

6=e3other (reserved for future use)

7=e3Framed (reserved for future use)

8=e3Plcp (reserved for future use)

LineCoding Zero suppression used on this interface.The line coding dsx3B3ZS and

e3HDB3 refers to patterns of normal bits and bipolar violations that are

used to replace sequences of zero bits of a specified length. Values are 1 - 3

and have the following names:

1=dsx3Other

2=dsx3B3ZS

3=e3HDB3 (reserved for future use)