Specifications

9-9
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
adddlsp
Command Modes Security level 3
Command History
Usage Guidelines The DLSAP (Digital Link Service Access Point) profile defines a collection of settings for the
D Channel protocol stack. These settings describe the operating characteristics of the interface between
LAPD and Q.931 call control.
You assign a DLSAP profile when adding a D Channel management path. The window-size parameter,
dlsapWinSize, depends on the modulo. For example, if the modulo is 8, then the range of the window
size is 1 - 8. If the modulo is 128, then the range is 1 - 128.
Examples The following example adds a DLSAP profile with default settings:
adddlsp 1
Related Commands
Release Modification
1.0 This command was first introduced.
Command Description
deldlsp Delete a DLSAP profile
lsdlsapstat List statistics for a DLSAP
lsdlsapstats List DLSAP statistics
lsdlsapstatus List status for a DLSAP
lsdlsp List a DLSAP profile
lsdlsps List DLSAP profiles