Specifications

9-8
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
adddlsp
adddlsp
Add a DLSAP profile.
adddlsp dlsapProfIndex [dlsapFrameLen dlsapWinSize dlsapRetransCount dlsapCongestionTimer
dlsapt200Timer dlsapt203Timer dlsapModulo dlsapTEIAssign dlsapMaxDlcs dlsapTEI]
Syntax Description
Defaults dlsapFrameLen: 1960
dlsapWinSize: 7
dlsapRetransCount: 3
dlsapCongestionTimer: 200
dlsapt200Timer: 1
dlsapt203Timer: 10
dlsapModulo: 128
dlsapTEIAssign: 2
dlsapMaxDlcs: 1
dlsapTEI: 1
dlsapProfIndex The identifier of a DLSAP Profile. Values: 1 - 20
dlsapFrameLen The frame length, which is the maximum number of octets in an information
field. Values: 1 - 1960
dlsapWinSize The window size, which is the maximum number of sequentially numbered
I-frames that may be outstanding. Values: 1 - 128
dlsapRetransCount The maximum number of retransmissions of a frame. Values: 1 - 1023
dlsapCongestionTimer The timer at the end of which DLCs are dropped if the congestion persists.
Values: 1 - 1023
dlsapt200Timer The number of seconds that must expire before initiating a frame. Values:
Integer. Values: 1 to 3
dlsapt203Timer The maximum time allowed without frames being exchanged. Values:
Integer.Values 20 to 60
dlsapModulo The modulus that sequentially numbers each I-frame. Values: 8 or 128
dlsapTEIAssign The Terminal Endpoint Identifier assignment setting:
• automatic—TEI is selected by the ASP Layer Management procedure
on the network side. Default: 2, which yields a TEI of 1
• nonAutomatic—TEI is selected by the user
dlsapMaxDlcs The maximum number of DLCs for this DLSAP. Values: 1 to 16
dlsapTEI The starting number for reassigning TEIs. This number is used in
conjunction with the previous two parameters to number TEIs. For example,
if TEI Assignment is nonAutomatic, Maximum DLCs for this DLSAP is 4,
and TEI is 14. When a D Channel is added, 4 TEIs starting at 14 are
preconfigured. Values: 0 to 63