Specifications

9-6
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
adddchan
adddchan
Add a D Channel.
adddchan Index Repetitions DlSapProfile MacSapProfile DS0 DS0format
Syntax Description
Defaults Repetitions: 1
DlSapProfile: 1
MacSapProfile: 1
DS0: 24
DS0format: 64
Command Modes Security level 3
Command History
Usage Guidelines Use this command to assign a DLSAP (Digital Link Service Access Point) and MACSAP (Media
Access Service Access Point) profile to the D Channel. These profiles define the operational
characteristics of the channel’s protocol stack. Before adding a D channel, you must define MACSAP
and DLSAP profiles.
Examples The following example adds a 56 kpbs D Channel (DS0 = 1) of line 1 on slot 14 using DLSAP profile
2 and MACSAP profile 3:
adddchan 14.1 2 3 1 56
Related Commands
Index The slot and line number, delimited by a period, of the new D Channel.
Repetitions The number of sequential lines to add. Values: 1 to 1136.
DlSapProfile The DLSAP profile number associated with the D Channel. Values: 1-10.
MacSapProfile The MACSAP profile number associated with the D Channel. Values: 1-10.
DS0 The DS0 number for this D Channel. Values: Integer 1-24.
DS0format The DS0 format for this D Channel. Values: 56 or 64.
Release Modification
1.0 This command was first introduced.
1.2 Added repetitions and DS0 format parameters.
Command Description
adddslp Add a DLSAP profile
addmacsapprof Add a MACSAP profile