Specifications

9-5
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 9 Command Reference
addcms
addcms
Add the community string that applies to an SNMP manager who subscribes to receive information on
traps.
addcms Comm-Str MgrAddr [Privilege]
Syntax Description
Defaults Privilege: 1
Command Modes Security level 1
Command History
Usage Guidelines You specify the access permission, read-only or read-write, to community strings. You can configure
up to 15 community strings.
Examples The following command adds a public community string with read-write privilege for all SNMP
managers:
addcms Public 0.0.0.0 2
Related Commands
Comm-Str An SNMP community string, such as “Public”. Values: string of up to
20 characters.
MgrAddr The IP address of the SNMP manager who wants to receive trap events. If
the management IP address is set to 0.0.0.0, the community string applies
to all IP addresses.
Privilege Read permission. Values: 1 = read-only, 2 = read-write.
Release Modification
1.0 This command was first introduced.
Command Description
addtmgr Add trap manager
delcms Delete community string
lscms List community string
lscmss List community strings
lstmgr List trap manager
lstmgrs List trap managers