Specifications

9-3

Cisco MGX 8260 Command Line Interface Guide

Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002

Chapter 9 Command Reference

Using Online Help

The MGX-8260 command line interface includes online help.

Command Syntax Help

To get help for a command, type the command without parameters. For example, to get help on the

parameters for the command that adds community strings, type the command without parameters as

follows:

addcms

The system responds with a description of the command syntax and parameter definitions as follows:

addcms <commStrCommString> <commStrMgrIpAddr> <commStrPrivilege>

commStrCommString: <string>

Community String.

commStrMgrIpAddr: <string>

The manager's IP address associated with this Community String.

If it is set to 0.0.0.0, the managers with any IP addresses are allowed.

commStrPrivilege: <num> 1: read-only, 2: read-write

The manager's privilege for read-only(1) or read-write(2).

Command Summary Help

To get a list of all commands for your user level, type help. To get a list of commands that start with a

particular pattern, type help and then the characters to match. For example, the following command lists

all commands that begin with add:

help add