Specifications

7-8
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 7 Performance Monitoring
Monitoring E1 Performance
Viewing E1 Real-Time Alarm Statistics
To view real-time statistics for a single E1 line, enter the lse1lnst command, specifying the slot and line
number, delimited by a period, of the line. The system displays the following real-time E1 information:
=======================================================================
E1 Line statistics (lse1lnst)
=======================================================================
E1 Line : 3.1
Loss of Signal : 0
Out Of Frame : 0
Yellow Alarm : 0
Remote Multiframe Alarm: 0
Frame Pattern Errors : 0
Far End Block Errors : 0
CRC Errors : 0
Alarm State : 0
Performance Alarm State: 0
Displayed Information Description
E1 Line The Slot.Line for these statistics
Loss of Signal The number of times Loss of Signal was detected, with or without
integrating to a LOS alarm
Out of Frame The number of times Out of Frame was detected, with or without
integrating to a OOF alarm
Yellow Alarm The number of times RAI was detected, with or without integrating to a
RAI alarm
Remote Multiframe
Alarm
The number of times the Remote Multiframe Alarm Indications was
detected, with or without integrating to Yellow alarm
Frame Pattern Errors The number of framing pattern errors encountered by the E1 interface
Far End Block Errors The number of times the Far End Block Error was encountered by the E1
interface
CRC Errors The number of times the CRC was encountered by an E1 interface