Specifications

7-5
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 7 Performance Monitoring
Monitoring E1 Performance
Clearing Real-Time T1 Statistics
To clear T1 real-time statistics, enter the clrds1lnst command, specifying the slot and line number,
delimited by a period, of the DS1 line and the statistic to clear.
The system clears the specified real-time statistic.
Monitoring E1 Performance
You can view current or historical statistics that the system collects on E1 performance. Current
statistics are performance statistics collected over the last fifteen minutes.
Viewing Current E1 Statistics
To view current statistics for a single E1 line, enter the lse1curst command, specifying the slot and line
number, delimited by a period, of the line. The system displays current statistics:
=======================================================================
E1 Line Current Statistics (lse1curst)
=======================================================================
E1 Slot.Line : 2.1
Path Errored Seconds : 12
Path Severely Errored Seconds : 0
Path UnAvailable Seconds : 0
Path Control Slip Seconds : 12
Path Code Violations : 0
Path Bursty Errored Seconds : 0
Line Errored Seconds : 0
Line Code Violations : 0
Errored Seconds Ratio : 158
Severly Errored Seconds Ratio : 0
Frame Error Errored Seconds : 0
Severly Errored Frame Error Seconds : 0
Unavailable Errored Frame Error Seconds : 0
ESR by Frame Errors : 0
SESR by Frame Errors : 0
Unavailable Errored CRC Seconds : 0
Errored Seconds by CRC Errors : 0
Severely Errored Seconds by CRC Errors : 0
Error Seconds Ratio Caused by CRC Errors : 0
SESR Caused by CRC Errors : 0
Error Seconds by Far End Block Errors : 0
Severely Errored Seconds by Far End Block Errors : 0
Unavailable Seconds by Far End Block Errors : 0
ESR by Far End Block Errors : 0
SESR by Far End Block Errors : 0
To view current statistics for all E1 lines, enter the lse1cursts command.